13 Ways on How to Make Bathtub White Again


The passage of time and wear and tear removes the whiteness of the bathtub enamel.

However, the possibility of changing and choosing a new bathtub is an affordable option for all budgets if you like the one you have and prefer to keep it.

If so, we will show you how to make a bathtub white again and go back to enjoying a good relaxing bath in a bathtub that looks new.

Why Do My Bathtubs Have Yellow Stains?

Sometimes we assume that the bathtub is clean since it receives its daily dose of soap and water, but it is the opposite.

The accumulation of soaps, shampoos, and other remains form a film of scale that grows with the days.

If the waters around us are hard, have excess iron or lime, the yellowish stains appear after a while in the bathtub. Regular cleaning can prevent the occurrence of these grey or yellow spots in the bathtub.

If lack of time, poor cleaning, or the use of inappropriate products has made your bathtub yellow, here are some easy tricks to whiten the bathtub.

Ways On How to Make Bathtub White Again

At first glance, it may seem complicated, but cleaning the yellow stains in the bathroom can become a very quick and easy task with these little tricks. We tell you the steps to follow; take note!

Homemade Tricks to Make Bathtub White Again

With some basic ingredients that you probably have at home or that are easy to find, you can solve the problem of enamel stains and whiten your bathtub.

Baking Soda and Water

Bicarbonate helps remove all kinds of stains from your bathtub, whether lime, soap, humidity, or saltpeter.

Discover how to use it to whiten your bathtub step by step with baking soda and water. It’s a cheap and effective solution that helps extend the useful life and eliminate stains from your bathtub.

  • In a container, mix bicarbonate and water until you get a more or less consistent paste.
  • Apply the paste to the stains. If you do it by hand, we recommend wearing gloves, although you can also do it with a plastic trowel to avoid damaging the enamel of the bathtub.
  • Leave the mixture to act on the stains for half an hour.
  • Rub gently with a foam sponge to remove the mixture and lighten the stains.
  • Finally, clean your bathtub with the product you use regularly.

Baking Soda and Vinegar

We have already seen that bicarbonate with water is quite effective. Still, you will achieve excellent results by mixing it with another common cleaning product in our homes, such as vinegar.

Of course, we are talking about white vinegar, especially for cleaning. It’s very effective and valid for removing yellow stains and lime stains.  Here’s how to go about it;

  • Add baking soda to all the stains in the tub.
  • Sprinkle with vinegar on top.
  • Let it rest for half an hour.
  • Rub with a brush or sponge.
  • Rinse with plenty of water to remove any remains that may remain.
  • Clean the bathtub as you normally do.

 Hydrogen Peroxide

Maybe you did not know it, but hydrogen peroxide is a very effective bleach for cleaning, and you will surely have a bottle in your home medicine cabinet.

Write down the steps to remove stains from your shower tray or bathtub with hydrogen peroxide:

  • Spray the yellow parts of the tub with hydrogen peroxide.
  • Leave on for 30 minutes.
  • Rinse with lukewarm water.
  • Clean the bathtub normally.

How To Get a Porcelain Bathtub White Again?

make bathtub white again

The tub is one of the focal points of a bathroom, and it can even set the tone for the rest of the room. For this reason, it must always be kept clean.

Among the most popular are porcelain enamel baths. Porcelain tubs are rare and were more common in the 1920s. Whatever tub you have in your home, you must learn how to clean it properly to be perfectly clean and safe.

  1. Mix 60 ml of white vinegar with 8 liters of water. In a 20-liter bucket, mix 60 ml of white vinegar and 8 liters of water. Mix the solution until it is perfectly homogeneous
  2. Wipe down the inside of the tub with a wet cloth. First, remove most of the dirt and dust from the tub’s surface before starting the deep cleaning. Notice the spots you will need to focus on when deep cleaning.
  • Immerse a sponge in the vinegar solution. Saturate a sponge with the vinegar solution you just prepared and wipe down the inside of the tub with it.
  1. Scrub the sides and the top of the tub and go down little by little until you rub the bottom. For stubborn stains, scrub with a soft bristle brush or toothbrush.
  2. Rinse the tub with lukewarm water. Let the vinegar solution sit on the surface for 5 minutes so that it dissolves the rest of the dirt.
  3. After the soaking time has elapsed, rinse the tub with lukewarm water, ensuring that the water washes away any dirt that the vinegar has loosened from the surface. Repeat the operation once a week.

How To Get a Plastic Bathtub White Again?

While commercial cleaners are good at removing plastic stains from hard water bathtubs, you can use simple cleaners made with homemade ingredients to save money and reduce chemical use. Highlighted below are methods on how to get a plastic bathtub white again

 Use Detergent To Make Bathtub White Again

Plastic bathtubs are easy to clean, so you should start cleaning with a mild detergent, brush, and warm water. Pour some detergent into a container and add a little water. Dip the cloth in the bowl and clean the dirt from the tub with it. Use a brush to remove stubborn stains. Rinse with water.

  Use Vinegar or Lemon Juice

Next, dip a cloth in a cup of vinegar and rub the stains on the plastic tub with the cloth. Apply gentle pressure with the cloth, working in a circular motion to avoid creating streaks. If the vinegar doesn’t completely dissolve the stains, try the same method with lemon juice.

Remove Stubborn Stains

Let the lemon or vinegar-soaked cloth juice stay for about 15 minutes for stubborn stains. Use a brush to scrub afterward and rinse with water.

 Use Chlorine Bleach

Warning: Before using this method, make sure all vinegar and vinegar odors are gone from the room. Avoid mixing the bleach from vinegar and chlorine as the reaction that could make you sick or even deadly.

Chlorine bleach is an effective solution to remove mold and calcium build-ups from plastic bathtubs. Since chlorine bleach has a strong odor, be sure to ventilate the room well before working on stains.

Mix equal parts bleach and water in a container and use it to clean the bathtub. Place the solution in a spray bottle and spray it into the tub evenly. Let the mixture sit in the tub for about 15 minutes before scrubbing it off with a toothbrush or brush. Rinse with water to remove the chemical.

 Clean With a Dry Cloth

Buff the tub with a clean, dry cloth once you’re done cleaning.

How To Make Acrylic Bathtubs White Again?

Are you wondering how to make acrylic bathtubs white again without tarnishing them?

Do you want to find ecological products and natural recipes to clean your bathroom equipment effectively? Follow the guide and learn all the ways to care for your acrylic bathtub properly.

Using Natural Products

Fill the tub with hot water and vinegar. If it’s too dirty or stained, fill it with lukewarm water and vinegar. This will loosen the grime and dirt before cleaning it.

Fill the tub with hot water and pour in two cups (500 ml) of vinegar. Let this sit for about 15 minutes, then drain the container.

The acid in the vinegar will help loosen dirt without damaging the tub.

Sprinkle Baking Soda on The Tub.

Do this all over the container while it is still wet. If you have not filled the tub with vinegar and hot water, pour or spray it completely with water. Let the baking soda sit for a few minutes

Sodium bicarbonate helps clean mold and soap scum. It is also gentle to use on acrylic tubs.

If you want to do a deep clean, you can use borax instead of baking soda.

 Scrub The Acrylic Tub.

Dip a soft cloth or sponge in the water and rub the sodium bicarbonate into the tub. This will form a paste-like layer as you clean it. Be sure to use a soft sponge so as not to scratch it. Gently brush the tub.

Use A Toothbrush

If you have trouble reaching edges or places where appliances are attached (like faucets), take an old toothbrush and scrub those spaces. It will allow you to remove grime and dirt gently.

Rinse The Tub and Treat the Stains with Lemon.

Fill a bucket with water and pour it over the tub to rinse off the dirt and baking soda. Continue to rinse until the tub is clean.

If you find any stains, rub half a lemon on them until you get rid of them. Rinse them with water and dry them with a soft cloth. Lemon is effective in removing hard water deposits.

How To Make Enamel Bathtubs White Again?

Cleaning the enamel bathtub can be difficult if we do not follow basic guidelines. Hence, this article chapter shows you some tricks on making enamel bathtubs white again.

Clean With Baking Soda

If your bathtub has a darkened film around the drain, you can remove it with baking soda. Dampen a cloth and rub the darkened area until it is completely removed.

Clean With Vinegar and Water

Vinegar is great for removing soap scum and polishing the surface. Dampen a cloth with a little vinegar and then wipe it all over the surface. Once finished, rinse with a little water, and you will see how it shines.

Remove tough stains this way:

  • Apply diluted bleach to the stains. For most stains, mix ½ cup (120 ml) of bleach and 1 gallon (4 liters) of water. Dip a cloth into the solution and rub it over the stain. You can also spray the solution directly on the stain. Leave it there for 1 to 2 minutes, and then rinse it off. Dry the tub once you’ve removed the stain
  • Soak the stains with a paste of hydrogen peroxide and cream of tartar. Make a mild cleaning paste if you have stubborn stains that don’t go away after using the bleach solution. Mix 1 part hydrogen peroxide with 2 parts cream of tartar. Spread this paste over the stains and leave it there for 30 minutes to 1 hour. Use a soft cloth to clean up the paste, then rinse the area. Blow-dry once you have removed the stains.

If the stains do not disappear, you can repeat the treatment until they are eliminated.

Clean With Lemon and Salt

The rust stains will disappear if you rub them with half a lemon sprinkled with salt.

It is also very common to find yellow spots that appear over time; try cleaning them with a mixture of half a cup of turpentine (turpentine) with two tablespoons of salt. Moisten a cotton cloth with this paste, and rub vigorously. Afterward, rinse with water.

Leave a Comment